Table of Content
Incomplete transfers, smeared polish and crooked or warped patterns can be stressful when your next appointment is waiting. Fortunately, it’s not always necessary to re-polish the nail from scratch. First, improve your chances of fixing a mistake without starting over by avoiding base color polishes that require three or more coats. Then, always follow with two coats of quick-dry top coat, giving them ample time to dry completely before stamping. The hard, glassy finish will act like the surface of a dry erase board, allowing you to remove a bad stamp without ruining the polish underneath.

If the plate has aesthetic images and the polish is thick, you will have a great nail art for sure. Before you begin, make sure everything you need is within easy reach. In addition to a stamping plate, stamping polish and scraper, you’ll need a paper towel, cotton balls or pads, polish remover, tape and quick-dry top coat.
Stamping Polishes
Theres a certain indescribable elegance about freshly-painted nails and an even more alluring charm when nails are done to perfection with intricate and exquisite designs. However, not all of us are keen on visiting a nail art professional, and most of us arent blessed with an artistic hand. That is why a tool like a nail stamper is convenient, accessible, and easy to use.
My advice is that you try a few different methods out – practice runs on a plain white surface to see what works best for you and your nails stamper. But if you are in a hurry you can always make your regular polish thicker to make it stamp better. I have an article that will guide you step by step how to do so, click here to read it. Roll the stamper head over the polish-filled pattern on the plate.
Featured Articles
I have an entire article on stamping plates which features my top recommendations, you can click to read it here. Nail stamper plates have 4 or more stamp patterns etched into their surface. To get a clean stamp on your fingernail, you need to remove any dried polish from these etchings. Wipe down the metal stamper plate with pure acetone. Add about a capful of 100% acetone to a small bowl and soak it up with a cotton ball. Use the saturated cotton ball to clean the plate, focusing especially on the “nooks and crannies” where dried polish may have collected.
This post will give you a detailed step-by-step guide on making your own nail stamping plates at home. You can paint your nails with a full set of circular lace. As there’s not enough place on the nail plate to give space to the whole design on a single nail, divide the designs among the nails and enjoy the grace of stamping nail art. Test the plate by applying the nail polish and and then proceed with the rest of the stamping steps. If the plate is fine, the design will transfer to the stamper and then onto your nails with no issues.
Nail Academy
Instead, throughout my years of stamping I have found that every nail stamper works a bit differently and various designs some times require different techniques. All you need to create your own nail stamping plate at home is; two acetate sheets, a craft knife, tape, and a permanent fine-liner. If you are an engineer, you will get to love this design. You’ll find readymade circuit board nail stamping which can give you a stunning manicure as portrayed here.

Using the scraper, immediately scrape over the polish at a 45-degree angle to remove the excess lacquer from the plate. After scraping, the wet polish should completely fill the grooves of the design and the plate’s surface should be clean. Your nail polish is low quality and not opaque enough. You can’t use clear or semi-opaque and low quality nail polishes otherwise the color won’t transfer or show through the nail stamp.
SourceMost of us love Minnie and Micky, and why not wear these cartoons on our hands. Try the Disney stamps nail art and we’re sure you’ll find your new mani very cheerful. Once you apply the design, fill some of the white spots with gray polish. You first have to polish your nails to cover the nail bed.
Some work best by simply pressing the stamper down gently whilst some perform better using a slight rolling technique. 2- Clear Stampers should never be primed with acetone if you do so the stamper will get cloudy. Instead, you can wash these stampers with soap and water and if needed you can gently buff them with a washing sponge. 1- Soft and Squishy Marshmallow Stampers shouldn’t be cleaned with acetone or buffed, if they do give you any trouble trying washing these stampers with water and soap. The last priming method you can try is using a small amount of acetone to clean your stamper, this should be your last resort. If you don’t want to use acetone you can try using some rubbing alcohol.
Thus make sure your nail polish offers high coverage and a lasting opaque finish. Since some kits come with their own nail polish, there is no need in buying anything else as it may not work just as good. Build up your nail art design kit with super trendy stamping plates and polish from Clear Jelly Stamper.
Engrave your logo, initials or original designs into an aluminum plate and transfer them onto your nails with this tutorial! You can have your nails painted with a various type of butterflies using nail stamping. Marta Nagorska is a Nail Technician and Nail Art Blogger based in London, UK. She runs the blog, Furious Filer, where she gives tutorials on nail care and advanced nail art. She has been practicing nail art for over 5 years and graduated from Northampton College with distinction with a Nail Technician and Manicurist degree in 2017. She has been awarded the top spot in the OPI Nail Art Competition.wikiHow marks an article as reader-approved once it receives enough positive feedback. In this case, 91% of readers who voted found the article helpful, earning it our reader-approved status.
For Halloween, you may want to use specific colors like red, white, or orange as the bottom base. Wait until your nails are perfectly dry before proceeding to the next step. TipãFor better product performance, we recommend to use our nail stamping polish Gel. Nail art is a vibe and unless it is done properly it just seems so irritating. Here I am discussing some of the tips and tricks that will surely help you become a perfectionist in the world of nail stamping.

No comments:
Post a Comment